Product Showcase

Single Cylinder Double Cylinder
Engine Model SIC P1 A/C SIC P2 A/C SIC P3 A/C SIC P6 A/C SIC P7 SIC TA1 SIC TA2 SIC TA3 SIC TA4 SIC TA5
No. of Cylinder 1 1 1 1 1 2 2 2 2 2
Rated Power (as per IS:11170) kw/Bhp 3.7/5 4.8/6.5 5.9 / 7.5 7.4 / 10.0 8.8/12 9.6/13 9.5/15 .11/16 14.7/20 17/24
Bore X Stroke mm 80x110 85x110 95x110 102x116 114.3x116 85 X 110 87.5 X 110 95 X 110 102 X 116 114.3 x 116
Type of Bearing TRB/BB •TRB/BB •TRB/BB TRB/BB TRB/BB BB BB BB BB BB
Rated Speed RPM 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500
Cubic Capacity CC 555 625 780 950 1190 1248 1324 1560 1900 1900
Compression Ratio 1 16.5 : 1 17.9 : 1 15.6 : 1 16.6 : 1 17.5:1 15.9:1 15.9:1 15.6:1 16.6:1 16.6:1
Sp. Fuel Cons. (at full load) g/kwh 250 250 250 250 250 250 250 250 250 250
Fuel Tank Capacity Liter 9 9 9 9 11 11 11 11 11 11
Fuel HIGH SPEED DIESEL [HSD]
Lubricating Oil SAE-30/SAE-40 OR ANY EQUIVALENT RANGE
Starting System Handel Start Handel Start / Electric Start
Governing Class CLASS B1 AS PER IS : 10000(PART 7) 1980
Lubricating System POP POP/GOP POP/GOP POP/GOP POP/GOP POP/GOP POP/GOP POP/GOP GOP GOP GOP
Cooling System Air Cool FTA/BTA FTA/BTA FTA/BTA FTA/BTA FTA/BTA FTA/BTA FTA/BTA FTA/BTA FTA/BTA FTA/BTA
Engine Bare Weight Kg 163 163 184 / 168 197 197 270 270 280 302 315
Gross Weight Packing Kg 220 220 240 / 225 235 235 345 345 355 385 400
Wooden Packing Case Size ( L x W x H ) mm 680 x 680 x 930 680x720x980
Cumbustion DIRECT INJECTION cumbustion system places an open type cumbution chamber in a cavity in the top of the Aluminum Alloy Piston in order to minimise power robbing of gas leakage & prevent heat loss resulting for powerful performance, low fuel consumption & easy start.
Rotation Standard Rotation is clockwise when looking from flywheel end. Engine with Reverse Rotation (Anti clockwise/Counter clockwise) can be built against specific requirement.
Lubrication Engines internal moving parts are partially lubricated by FORCE FEED LUBRICATION by LUBRICATING PUMP fitted with lubricating oil filter.
Cooling Engine's cooling is arranged through Water Flow.A radiator or cooling tank can be arranged if required.
Balancing Engine is balanced with two balance weights bolted on crank shaft. Flywheel is balanced for longer life of moving parts.
Drive STANDARD power take off is from flywheel side at full speed. Power take-off from gear end at half Engine speed or full Engine speed can be provided against specific requirement.
Fuel System Fuel is supplied to the fuel pump by gravity feed through wire mesh filter in fuel tank & efficient paper element filter in fuel filter.
Standard Accessories Starting handle, Exhaust Silencer, Air Cleaner & Spanner Set, Screw Driver.
• ISI Approved

Company reserve the rights to change illustrations, technical data, figures, specifications etc. without prior notice.

TECHNICAL SPECIFICATIONS Single Cylinder Double Cylinder
Model SIC P5 SIC P6.5 SIC P7 SIC P8 SIC P10 SIC P12 SIC TW 1 SIC TW 2 SIC TW 3 SIC TW 4 STC TW 5 STC TW 6
No. of Cylinder 1 1 1 1 1 1 2 2 2 2 2 2
Rated Power (as per IS:11170) kw/Bhp 3.7/5 4.8/6.5 5.2/7 5.9/8 7.4/10 9.2/12.5 9.6/13 11/15 11.75/16 14.7/20 14.7/20 18.8/25
Bore X Stroke mm 80x110 85x110 87.5x110 95x110 102x116 114.3x116 85 X 110 87.5 X 110 95 X 110 102 X 110 102 X 116 114.3x116
Type of Bearing TRB•/BB TRB•/BB TRB•/BB TRB•/BB TRB•/BB TRB/BB BB BB BB BB BB BB
Rated Speed RPM 1450 1500 1500 1500 1800 1500 1500 1500 1500 1500 1500 1500
Cubic Capacity CC 555 626 780 780 950 1190 1248 1324 1560 1896 1900 2328
Compression Ratio 16.5:1 17.9:1 15.6:1 15.6:1 16.6:1 `15.7:1 17.5:1 15.9:1 15.6:1 16.6:1 16.6:1 15.9:1
Specific Fuel Consuption (SFC) g/kwh 240/236 245/240 250 250 250 250 250 250 250 250 250 250
Fuel Tank Capacity Liter 9 9 9 9 9 9 11 11 11 11 11 9
Fuel HIGH SPEED DIESEL [HSD]
Lubricating Oil SAE-30/SAE-40 OR ANY EQUIVALENT RANGE
Starting System Handel Start Handel Start / Electric Start
Governing Class CLASS B1 AS PER IS : 10000(PART 7) 1980
Lubricating System POP POP/GOP POP/GOP POP/GOP POP/GOP POP/GOP POP/GOP POP/GOP POP/GOP POP/GOP POP/GOP POP/GOP POP/GOP
Cooling System Water Cool Water Cool/Radiator Cooling System
NET WT. KGS Kg 150 150 165 170 175 175 215 274 274 284 284 284
GROSS W Kg 210 210 225 230 235 235 280 340 340 350 350 350
Wooden Packing Case Size
( L x W x H )
mm 680 x 680 x 930 680x720x980
Cumbustion DIRECT INJECTION cumbustion system places an open type cumbution chamber in a cavity in the top of the Aluminum Alloy Piston in order to minimise power robbing of gas leakage & prevent heat loss resulting for powerful performance, low fuel consumption & easy start.
Rotation Standard Rotation is clockwise when looking from flywheel end. Engine with Reverse Rotation (Anti clockwise/Counter clockwise) can be built against specific requirement.
Lubrication Engines internal moving parts are partially lubricated by FORCE FEED LUBRICATION by LUBRICATING PUMP fitted with lubricating oil filter.
Cooling Engine's cooling is arranged through Water Flow.A radiator or cooling tank can be arranged if required.
Balancing Engine is balanced with two balance weights bolted on crank shaft. Flywheel is balanced for longer life of moving parts.
Drive STANDARD power take off is from flywheel side at full speed. Power take-off from gear end at half Engine speed or full Engine speed can be provided against specific requirement.
Fuel System Fuel is supplied to the fuel pump by gravity feed through wire mesh filter in fuel tank & efficient paper element filter in fuel filter.
Standard Accessories Starting handle, Exhaust Silencer, Air Cleaner & Spanner Set, Screw Driver.
• ISI Approved

Company reserve the rights to change illustrations, technical data, figures, specifications etc. without prior notice.

Light Weight High Speed Diesel Engine & Pumpset

Engine Specification

Cooling System Air Cooled Water Cooled
Engine Model SIC MA-35 SIC MA-5 SIC MW-35 SIC MW-5
No. of Cylinder 1 1 1 1
Rated Power (as per IS:11170) kW/Bhp 2.6 / 3.5 3.7 / 5.0 2.6 / 3.5 3.7 / 5.0
BorexStroke mm 76x80 76x76 76x76 85x80
Type of Bearing TRB TRB TRB •TRB
Rated Speed cc 345 455 345 455
Compression Ratio 1 18:01 18:01 18:01 18:01
Fuel Cons. (HSD) g/Kwh/h 245 245 245 245
Fuel Tank Capacity Litre 3.5 3.5 3.5 3.5
Fuel High Speed Diesel
Lubricating oil SAE-30/SAE-40
Starting System Handel Start
Governing Class Class B1
Lubricating System Plunger type Oil Pump
Engine Bare Weight Kg 86 86 80 80
Packed Weight Kg 116 116 110 110
Packing Case Size L x W x H
mm
520 x 585 x 735 520 x 585 x 735
• ISI Approved

Light Weight Water Pumpset

ENGINE MODEL: SIC MW-35 SIC MA-35 SIC MW-5 SIC MA-5 SIC MW-5 SIC MA-5
SUITABLE ENGINE H.P.: 3.5 3.5 5 5 5 5
COOLING SYSTEM: W/C A/C W/C A/C W/C A/C
TYPE: TRB TRB •TRB TRB •TRB TRB
PUMP DELIVERY: Centre Centre Centre Centre Centre Centre
RPM 1500 1500 1800 1500 1800 1500
PUMP SIZE IN MM:  Suc x Del 65 x 50 65 x 50 80 x 65 80 x 65 75 x 75 75 x 75
EFFI.% 64 64 65 65 70 70
HEAD IN METER: 7 to 10 7 to 10 12 to 18 12 to 18 12 to 17 12 to 17
strong>DISCHARGE:-(LIT/SEC) 11.1 to 6.0 11.1 to 6.0 22 to 10 22 to 10 24.5 to 12 24.5 to 12
DUTY POINT: - - - - - -
1.HEAD IN METER 9 9 16 16 15 15
2.DISCHARGE IN LIT/SEC 8.75 8.75 14 14 16.5 16.5
• ISI Approved

Monoset Pump

ENGINE MODEL: SIC MW-35 SIC MW-5 SIC MW-5
Suitable Engine H.P. 3.5 5 5
Cooling System W/C W/C W/C
Type TRB •TRB •TRB
Pump Delivery Centre Centre Centre
RPM 1500 1500 1500
Pump Size in mm/Suc x Del 80 x 65 80 x 65 100x100
Effi. % 64 64 68
Head in Meter 7 to 10 16 to 19 9.6 to 13.2
Discharge Lit/sec 11.1 to 6.0 22 to 10 22 to 10
Duty Point - - -
Head in Meter 8.9 19 13
Discharge in Lit/sec 8.6 12 16
• ISI Approved

Company reserve the rights to change illustrations, technical data, figures, specifications etc. without prior notice.

Model SIC L6 SIC L8 SIC L8/A SIC L10 SIC CBW 10 DI TRB 12 DI TRB 14 DI TRB 16
No. of Cylinder 1 1 1 1 1 1 1 1
Bore mm 114.3 114.3 120 120 120 127 130 130
Stroke mm 139.7 139.7 139.7 139.7 139.7 139.7 140 140
Rated Power (as per IS:11170) kw/Bhp 6/4.4 8/5.9 10/7.35 10/7.35 10/7.35 12/8.8 14/10.3 16/11.8
Rated Speed R.P.M 650 850 900 1000 1000 1000 1000 1000
Certification IS:11170 ISI ISI ISI ISI ISI - - -
Bearing TRB TRB TRB TRB TRB TRB TRB TRB
DISPLACEMENT VOLUME CC 1432.7 1432.7 1579.24 1579.24 1579.24 1579.24 1768 1768
SPECIFIC FUEL CONSUMPTION (SFC) g/kwh 268 268 268 268 268 268 268 268
Lubricating oil
Fuel Tank Capacity Liter 9 9 9 9 9 10 10 10
Starting System Handel Start
Lubricating Oil SAE-40
Governing Class CLASS B1
Cooling System Water Supply with Radiator or Cooling Tank
NET WT. KGS Kg 320 340 360 370 400 420 430
Standard Accessories Starting handle, Exhaust Silencer, Air Cleaner & Spanner Set, Screw Driver.
• ISI Approved

Company reserve the rights to change illustrations, technical data, figures, specifications etc. without prior notice.

Engine Details Pump Size Partical Handling
Type No.of Cyl. H.P. r.p.m. Suc. Del. Head Range in Meter Discharge in LPM Size in mm
A.C. 1 6.5 1500 80 80 13 to 19.5 17.5 to 6 15
A.C. 1 8 1500 80 80 13 to 19.5 17.5 to 6 16
A.C. 1 10 1500 100 100 11 to 20 28.5 to 17 17.3
A.C. 1 12 1500 80 80 15 to 20 22 to 19 15.3
A.C. 2 13 1500 80 80 15 to 20 22 to 19 15.3
A.C. 1 12 1500 100 100 12.5 to 20 36 to 26 18.6
A.C. 2 13 1500 100 100 12.5 to 20 36 to 26 18.6
A.C. 2 16 1500 100 100 12.5 to 20 41 to 21 23
A.C. 2 24 1500 150 150 10.2 to 19.8 67 to 51 34
• ISI Approved

Application for crude oil and mud slurry handling in oil fields and cement slurry water.

Engine Model Suitable Engine H.P. Cooling System Type Pump Type Pump Delivery RPM Pump Size in mm Suc x Del Head in Meter Discharge Lit/sec
SIC P5 5 W/C •TRB/BB Volute Centre 1500 75 x 62 12 to 17 18 to 12
SIC P1 A/C 5 A/C •TRB/BB Volute Centre 1500 75 x 62 12 to 17 18 to 12
SIC P5 5 W/C •TRB/BB Volute Centre 1500 75 x 75 13 to 15 20 to 15
SIC P1 A/C 5 A/C •TRB/BB Volute Centre 1500 75 x 75 12 to 17.5 13.5 to 21
SIC P6.5 6.5 W/C •TRB/BB Volute Centre 1500 75 x 75 12 to 17.5 13.5 to 21
SIC P2 A/C 6.5 A/C •TRB/BB Volute Centre 1500 75 x 75 12 to 17.5 13.5 to 21
SIC P6.5 6.5 W/C •TRB/BB Volute Centre 1500 100 x 100 5 to 8 33 to 17
SIC P2 A/C 6.5 A/C •TRB/BB Volute Centre 1500 100 x 100 5 to 8 33 to 17
SIC P8 8 W/C •TRB/BB Volute Centre 1500 100 x 100 10.4 to 14.3 32 to 21
SIC P8 8 W/C •TRB/BB Split Centre 1500 100 x 100 14.4 to 19.8 25 to 12
SIC P4 A/C 8 A/C •TRB/BB Split Centre 1500 100 x 100 14.4 to 19.8 25 to 12
SIC P10 10 W/C •TRB/BB Split Centre 1500 100 x 100 9 to 16 43.4 to 32.2
SIC P6 A/C 10 A/C •TRB/BB Split Centre 1500 100 x 100 18.7 to 13.6 32 to 22.5
• ISI Approved
Single Phase 240Volts, 50Hz. 1.0 P.F. 1500RPM GENSET
KVA KW AMP HP NO. OF CYLINDER BORE COOLING For A/C For W/C
2.2 2.2 8 3.5 1 85 A/C or W/C FTA N.A
3.5 3.5 14 6.5 1 85 A/C or W/C FTA/BTA Radiator
5 5 19 8 1 95 A/C or W/C FTA/BTA Radiator
7.5 7.5 28 10 1 102 A/C or W/C FTA/BTA Radiator
10 10 38 12.5 1 144.3 A/C or W/C FTA/BTA Radiator
10 10 40 16 2 95 A/C or W/C FTA/BTA Radiator
15 15 60 25 2 114 A/C or W/C FTA/BTA Radiator
• ISI Approved
Three Phase 415Volts, 50Hz. 0.8 P.F. 1500 RPM GENSET
ALTERNATOR DIESEL ENGINE
KVA KW AMP HP NO. OF CYLINDER BORE COOLING For A/C For W/C
5 4 7 8 1 95 A/C or W/C FTA/BTA Radiator
7.5 6 10 10 1 102 A/C or W/C FTA/BTA Radiator
10 8 14 12.5 1 114.3 A/C or W/C FTA/BTA Radiator
10 8 14 15 1 120 A/C or W/C FTA/BTA Radiator
10 8 14 16 2 95 A/C or W/C FTA/BTA Radiator
12.5 10 17 16 2 95 A/C or W/C FTA/BTA Radiator
15 12 21 20 2 102 A/C or W/C FTA/BTA Radiator
20 16 28 25 2 114.3 W/C N.A Radiator
25 20 35 30 2 120 W/C N.A Radiator
• ISI Approved

•FTA:Fan Cooling System        •BTA:Blower Type Cooling System

Engine Data:-
Cooling : AIR COOLED ENGINE:-
>Fan Cooling:-Cold Air is forced to cylinder head & cylinder block by fan fitted on flywheel through stream lined cowling thus cooling engine efficiently.
>Blower Type:-Air passing through cylinder block is exhausted from engine through Fan mounted on engine.
WATER COOLED ENGINE:-
> Engine cooling is arranged by run through Water Supply.
>A radiator or cooling tank can be fitted on Engine if required.
Lubricating System:-
Splash system of lubrication in case of Tapper Roller bearing type engines.
Force Lubricating System is used In case of Bush Bearing engine.
Starting System:Handel Start / Self Start/Semi Automated System.
Control Panel:-
Volt meter & amepre meter (analog or digital)
Battery charging indicator,oil preassure(optional)
Engine speed(optional)
Push start button/key start button.
Altarnator Data:-
Altarnator:-
2.2kva to 30kva
Aluminium body with 100% Copper Winding.
Phase:- Single-240Volt-1.0P.F.or ThreePhase-415Volt-0.8P.F.
Frequency:- 50Hz
Isulation Calss:- H
Voltage Regulation:- +/-5%
Single Phase Three Phase
Model 1 2 3 4 5 1 2 3 4 5 6 7 8
AC Output KVA 5 7.5 10 12.5 15 5 7.5 10 12.5 15 20 25 30
KW 5 7.5 10 12.5 15 4 6 8 10 12 16 20 24
Ac Amp. 21 31.5 42 52 62.5 7 10.5 14 17.5 21 28 35 42
Ac Volt 240 240 240 240 240 415 415 415 415 415 415 415 415
R.P.M 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500
P.F. 1.5 1.5 1.5 1.5 1.5 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8
Insulation CL Class H Class H Class H Class H Class H Class H Class H Class H Class H Class H Class H Class H Class H
Hz. 50 50 50 50 50 50 50 50 50 50 50 50 50
Voltage Regulation +/-5% +/-5% +/-5% +/-5% +/-5% +/-5% +/-5% +/-5% +/-5% +/-5% +/-5% +/-5% +/-5%
• ISI Approved

Ambient Tempreature:- Less than 40%

Alluminum Die Casting Body:- 100% Copper Winding
Screen Proctected Self Vantilated Machine:- Low Manitance

Normal Operating Condition:-
Altitude:- Less than 1000m
Ambient Tempreature:- Leass than 40 degree Celsius
Power factor:- from 0.8 lagging up to Unity Power Factor

Limit For Safe Operation:-
Over Speed:- 20%(1800 rpm for 50Hz)
Over Load:- 110% of Rated Value for 1hr.